LAS VEGAS, NV — ISO 9001:2015
Precision laser cutting for the parts your product depends on.
Fiber laser cutting of flat sheet and tube. ±0.05 mm tolerance. 12 mm mild steel, 3 kW power, 1500 × 3000 mm bed, 6.2 m tube length. Built for production runs from prototype to 1,000,000+ units.
- Units shipped
- 1M+
- Quality pass rate
- 99.9%
- Certified
- ISO 9001:2015
- Fiber laser power
- 3 kW
Capabilities
Two cells, one quality system.
Flat sheet and tube laser cells run on the same ISO-controlled workflow, the same inspection cadence, and the same first-article documentation standard.
Laser Cutting
Flat Sheet Laser Cutting
3 kW fiber laser cutting of flat sheet up to 12 mm mild steel and 6 mm stainless, with ±0.05 mm tolerance on a 1500 × 3000 mm bed.
- 12mm max
- ±0.05 mm (±0.002 in)
- 3 kW fiber laser
View capabilities
Laser Cutting
Tube and Pipe Laser Cutting
6 kW fiber tube laser for round, square, and rectangular tube up to 220 mm diameter and 6.2 m length, with full multi-axis profile cutting.
- 12mm max
- ±0.1 mm on hole position; ±0.2 mm on length
- 6 kW fiber laser
View capabilities
Built for production
Co-located with sheet metal forming and finishing.
Parts cut here continue directly to our bending, welding, hardware insertion, and finishing cells under the same roof. Zero inter-cell freight, single-PO ownership, one inspection report covering the whole part.
- UL Listed
- ISO 9001:2015
- 1M+ units shipped
Common questions
- What materials and thicknesses do you cut?
- Mild steel to 12 mm, stainless steel to 6 mm, aluminum to 5 mm, plus brass to 3 mm, copper to 2 mm, galvanized, and coated sheet on the flat-sheet cell. Tube laser handles round, square, and rectangular section up to 220 mm OD or 200 × 200 mm at 12 mm wall mild steel (8 mm aluminum), to 6.2 m length.
- How fast can you turn around a prototype?
- 48–72 hours for prototype-scale flat sheet parts in standard materials. Tube laser prototype turn is 5 business days. Production lead times run 5–14 business days depending on quantity and finishing requirements.
- Are you ISO certified?
- Yes. Nevatronix is ISO 9001:2015 certified, and finished assemblies leaving the facility are UL Listed where applicable. First-article inspection reports are included on every production order; PPAP available on request.
- Where are you located and do you ship?
- Las Vegas, Nevada. We serve the southwest US directly and ship nationwide via standard freight. Customer pickup is welcome.
Send your part. We'll send a quote.
Upload a DXF or STEP. We'll come back with tolerance feedback, material recommendations, lead time, and unit pricing within one business day for most parts.